Dynamic mechanical analysis

With an additional lower drive unit, the Anton Paar rheometer combines dynamic mechanical analysis (DMA) and highly sophisticated rheological investigations in one device. Dynamic mechanical analysis is used to characterize the viscoelastic behavior of polymers like glass transition temperature (Tg). To perform DMA, bending, tension, compression, and torsion are applied to solid (e.g. composites), soft (e.g. foams), and liquid samples (e.g. amorphous polymers above Tg). Additionally, different measuring systems and temperature control units (-160 °C up to +600 °C) can be applied to create the ambient conditions needed for your DMA measurement. Watch this 20-minutes course to find out more about dynamic mechanical analysis.

立即獲得免費存取權限!

只需簡單填寫下面的表格,即可免費存取工具和相關內容。

正在載入…

錯誤